Nylon PA12+GF Light Green 1.75mm – 500g

Fiberlogy Nylon PA12+GF Light Green is a premium PA12 filament reinforced with 15% glass fibre for demanding functional and mechanically stressed 3D printed parts. It combines high strength, excellent impact resistance, dimensional stability and heat resistance up to approximately 170°C, depending on the load.

The glass fibre reinforcement increases stiffness and reduces shrinkage. Compared with carbon-fibre-reinforced nylon, PA12+GF offers greater flexibility, making it suitable for parts exposed to impacts, vibrations and changing loads. The Light Green colour helps technical components stand out.

Benefits of Fiberlogy Nylon PA12+GF

• 15% glass fibre: improved stiffness and mechanical performance.
• Heat resistance: up to approximately 170°C depending on load.
• Excellent impact resistance: for functional components.
• Dimensional stability: reduced shrinkage and accurate prints.
• Chemical and abrasion resistance: suitable for technical applications.
• Lower moisture absorption: PA12 absorbs less moisture than PA6.
• Light Green: clearly visible technical parts.

Typical applications

• Functional prototypes and mechanical parts
• Machine components, brackets and housings
• Automotive and model-making components
• Parts exposed to impacts or abrasion
• Technical fixtures and assembly aids
• Parts requiring heat resistance and dimensional accuracy

Printing recommendations

Glass fibres are abrasive. Use a hardened steel or other wear-resistant nozzle; standard brass nozzles wear much faster. For optimal results, dry the filament at 80°C for approximately four hours before printing and keep it dry during processing.

Fiberlogy Nylon PA12+GF Light Green is a durable glass-fibre-reinforced nylon filament for challenging technical 3D printing projects.