Magigoo 3D Glue Stick Pro for PC, 50ml

Magigoo PC was specially developed for professional use with polycarbonate (PC) filaments. It ensures extremely strong adhesion during printing while allowing for effortless removal of the part after cooling. The principle is simple: strong adhesion when hot – easy "popping off" when cold, without any tools.

Polycarbonate is one of the most powerful materials in FDM 3D printing. It impresses with high strength, toughness, and excellent temperature resistance. However, these very properties make the material challenging to process. The high glass transition temperature requires high printing and bed temperatures, which can lead to warping and adhesion problems – especially with larger parts or open printing systems.

Magigoo PC was developed to solve exactly these challenges. It reliably improves adhesion on glass as well as on various print surfaces, while preventing prints or adhesion plates from permanently fusing together. This not only improves print quality but also reduces wear on print surfaces.

Application is straightforward: shake the bottle, press the applicator onto the print bed, and apply evenly to the desired area. Then print as usual according to the manufacturer's instructions. After printing, the part should cool completely – it usually detaches itself then. Residues can be easily removed with a damp cloth.

Safety note:
Using it with materials other than PC can lead to excessive adhesion and damage the print surface.

Tips for optimal results:
- For large prints, a brim of approx. 20 mm with multiple lines is recommended.
- If adhesion is too strong, a little water can be added under the part to facilitate removal.

An indispensable tool for demanding PC prints – maximum adhesion, minimal problems.