Magigoo 3D Adhesive Stick Pro for PA, 50ml

Magigoo 3D Adhesive Stick Pro for PA, 50ml

Magigoo PA was specially developed for professional use with polyamide (nylon) filaments. It ensures reliable adhesion during printing and allows for easy removal of the part after cooling. Adhesive residues can be easily removed with proper application.

Polyamides are among the highest-performance materials in FDM 3D printing. They are characterized by high strength, toughness, elasticity, as well as excellent wear, chemical, and temperature resistance. Typical representatives include PA6, PA6.6, and PA12, some of which are additionally reinforced with glass or carbon fibers. However, these very properties make nylon challenging to process: low adhesion to conventional printing surfaces and a high tendency to warp make clean printing results difficult.

Magigoo PA was developed to specifically address these challenges. It significantly improves adhesion to the print bed and reduces warping, even with larger or technically demanding parts. At the same time, removal after cooling remains easy and controllable.

Application is straightforward: shake the bottle, press the applicator onto the print bed, and apply evenly to the desired area. Then print as usual according to the manufacturer's instructions. After printing, the part should cool completely – it will then detach much more easily. Residues can be removed with a damp cloth.

Safety notice:
Use with materials other than PA may lead to excessive adhesion and damage the print surface.

Tips for optimal results:
- For larger prints, a brim of approx. 20 mm is recommended.
- If adhesion is too strong, a little water can be added under the part to facilitate removal.

The perfect solution for demanding nylon prints – more control, better results.